Nowadays, it is a tough task to monitor and control the project effectively. I am sure every one of us adopts so many methodologies to keep our control on the project. But apart from this control, almost 70% of the project fails miserably. And if the project is completed successfully – either you have taken more money to finish the same (i.e., over-budgeted) or you have taken more time to finish the same (i.e., behind schedule). Both situations are poor for a project manager. So, the bottom line is what the project manager should do to save this bad situation in the project? It is not an easy work to control the pricing, scheduling, and scope for the project. These three project constraints will always create a problem for your project. Be alert! If you are good in maintaining these three baselines (Scope baselines, schedule baselines, and cost performance baselines); you are doing excellent.

So, how to maintain these baselines? How to control the project effectively, so that you can finish the project within the baselines? PMBOK® Guide (Project Management Body of Knowledge) recommends some standard processes to control and monitor the project successfully. Let me explain to you the steps in project monitoring and control in brief.

Want to become competent in core project management areas? Check out our PMP Certification Course Preview here!

Monitor and Control Project Work & Perform Integrated Change Control

After project planning, you have to start working on the project as per the planning, and now it is high time for you to check whether you are working in the same way as planned. As initially, you have planned your project as per the available information in hand (Rolling Wave Planning), it is obvious that there will be a change in the project as work progresses (That’s why planning is iterative in nature and progressively elaborated). Good quality project managers always look for avoiding the changes and controls them effectively, if it occurs, balancing the baselines. Discuss with the consultants, other SMEs, senior management, or any other project stakeholders, including your customer and try to find out a solution. Change is required but not always mandatory. Don’t entertain the change request that has nothing to do with project requirement.

Verify Scope and Control Scope

Verify scope generally comes after perform quality control. When your project deliverable is accepted from quality control, it will move to verify scope stage. Your customer will verify the scope whether the deliverable fulfills the entire requirement and if it is correct at that point, the deliverable will be transitioned to the customer site. If not, again, the deliverable needs to revisit in the production stage. As a project manager, you should control the scope throughout the project life cycle. It is not like when a deliverable is ready then only you will start to control the product; it is an all-time process. You should be extra careful so that scope requirement could not slip from your hand.

PMP cerification training

Control Schedule and Control Cost

Through Earned Value Management (EVM), you should control the schedule and cost for your project. You know your CPI (Cost Performance Index) and SPI (Schedule Performance Index), and based on the result of CPI and SPI, you can monitor and control the project. If your CPI is in positive or more than 1, you are good in project cost incurred, and if the SPI is in positive or more than 1, you are good in the schedule (Refer to Cost Management Knowledge Area, PMBOK® Guide).

Perform Quality Control

Before delivering the product to the customer, you need to cross-check whether you are delivering the product with the quality required by the customer. For this, you can seek the help of so many quality tools or quality processes, like Root Cause Analysis, Pareto Chart, Control Chart, Histograms, etc.

Interested in becoming a Project Manager? Gain all the skills and knowledge required to become a skilled project manager through this Project Management course.

Report Performance

As you are managing a large project with several numbers of stakeholders, you need to update the project status to every responsible stakeholder. Mainly you need to update the project progress report like – where you are in the project progress? What will be forecasting for your project?

Control Risk

Risk can be anytime and anywhere in your project. As a project manager, you can not say that you will check risk only in the monitoring and controlling stage. Obviously not!!! Risk should be measured just after the project has been started. It is an all-time task for the project manager.

Administer Procurement

If you are subcontracting any process to some other party, you need to monitor their performance also in a well-timed manner. Based on their performance, project fate could be decided. So, don’t take it lightly. It is the project manager’s sole responsibility to monitor and control the work of subcontractors too.

Simplilearn offers best-in-class PMP® training to help you ace your exam in the first attempt.

Are you a professional who is aspiring to be a project manager? Try answering this PMP Practice Questions and assess yourself!

PMP® and PMI® are registered trademarks of the Project Management Institute, Inc.

About the Author


Simplilearn is one of the world’s leading providers of online training for Digital Marketing, Cloud Computing, Project Management, Data Science, IT, Software Development, and many other emerging technologies.

View More
  • Disclaimer
  • PMP, PMI, PMBOK, CAPM, PgMP, PfMP, ACP, PBA, RMP, SP, and OPM3 are registered marks of the Project Management Institute, Inc.